-
* Steel Channel Frame * 3" Steel Channel Crossmembers * 5" Steel Channel Tongue, Fully Wrapped * HD Bulkhead * A-Frame Posi-Lock Coupler & Dual Safety Chains * Sealed Wiring Harness & 7-Way Plug * 7K Set-Back Jack * Taper Cut Under Tail for Low Ap...4 weeks ago on RVUSATools
-
* 3" x 2" x 3/16" Steel Angle Frame (Single Axle) * 4" x 3" x 1/4" Steel Angle Frame (Tandem Axle) * 3" x 2" x 3/16" Steel Angle Crossmembers * 4" Steel Channel Tongue * 2" x 1-1/2" Steel Tube Uprights * 2" x 2" Steel Tube Top Rail * 2" A-Frame Po...4 weeks ago on RVUSATools
-
7.5' x 16' All Aluminum UTV Package 84" Interior Height Rear Ramp Door w/ Spring Assist Rear Ramp Door Flap Rear Stabilizer Jacks 6 - 5,000 lb Recessed D-Ring Tie Downs Rear Spoiler with Loading Lights 3" Bottom Trim Upgrade One Piece Aluminum Roo...4 weeks ago on RVUSATools
-
* Low Profile Pierced Beam Frame * 12" Wide Flange, I-Beam Frame & Tongue * 3" Steel Channel Crossmembers * Gooseneck Hitch (Tag Hitch Available) * Steel Channel Sides * 2-5/16" Adjustable Height Gooseneck Coupler and Safety Chains * Sealed Wiring...4 weeks ago on RVUSATools
-
* Steel Channel Frame * 3" Steel Channel Crossmembers * 5" Steel Channel Tongue, Fully Wrapped * HD Bulkhead * A-Frame Posi-Lock Coupler & Dual Safety Chains * Sealed Wiring Harness & 7-Way Plug * 7K Set-Back Jack * Taper Cut Under Tail for Low Ap...4 weeks ago on RVUSATools
-
* Steel Channel Frame * 3" Steel Channel Crossmembers * 6" Steel Channel Tongue, Fully Wrapped * HD Bulkhead * A-Frame Posi-Lock Coupler & Dual Safety Chains * Sealed Wiring Harness & 7-Way Plug * 12K Set-Back Jack * Taper Cut Under Tail for Low A...4 weeks ago on RVUSATools
-
* 5" Steel Channel Frame and Tongue * 3" Steel Channel Crossmembers * 24" Tall, 12-Gauge Steel Sides * 2-5/16" A-Frame [Posi-Lock Coupler](https://www.hhtrailer.com/wp-content/uploads/2023/04/Coupler-Pump-Box-Jack.mp4) & Safety Chains * Sealed Wir...4 weeks ago on RVUSATools
-
* 3" x 2" Aluminum Angle Extrusion Frame * 3" x 2" Aluminum Angle Extrusion Crossmembers (Single Axle) 4" Aluminum Triple Tube Tongue (Single Axle) * 2" x 1-1/2" Aluminum Extrusion Tube Uprights * 2" x 2" Aluminum Tube Top Rail * 2" A-Frame Posi-L...4 weeks ago on RVUSATools
-
3500# Rubber torsion axle (rated at 2990#) - No brakes - Easy lube hubs ST205/75R14 LRC Radial tires (1760# cap/tire) Aluminum wheels, 5-4.5 BHP Aluminum fenders Extruded aluminum floor 8) SS recessed tie rings (4 per front & rear) Alu...Over 4 weeks ago on RVUSATools
-
Radial Tires with Silver Mod Wheels (1) Axle, Spring 3,500 Idler 16" O/C Floor Crossmembers Painted Black Jack Angled Flat Roofed Nose Vee Nose 48" Tongue 3 Tube 16" O/C Wall Posts Black Undercoat Paint on Chassis and Exposed Ste...Over 4 weeks ago on RVUSATools
-
Aluma 82" x 16' Tilt Tandem Axle Electric Brake Front Rail 2) 3500# Rubber torsion axles - Easy lube hubs Electric brakes, breakaway kit ST205/75R14 LRC Radial tires (1760# cap/tire) Control valve to adjust rate of descent Bed locks for...Over 4 weeks ago on RVUSATools
-
8.5' x 24' 9990 GVWR 84" Interior Height 60" x 48" Car Access Door 6" Steel Tube Frame * 16" On-Center Formed Channel Steel Crossmembers * 6" Steel Triple Tube A-Frame Tongue * 24" On-Center Steel Tube Wall Uprights (10k Models) * 24" On-Center Ga...Over 4 weeks ago on RVUSATools
-
83"x14', (2) 8000# Equa Flex EZ-Lube brake axles, 17,461# GVWR, 40" sides, aluminum ramps, square tubing frame & tongue, tarp, 4 d-rings, power up & down, 13 ton scissors hoist, 10 ga. floor, 10 ga. walls, new 235/85/R16 (14) ply radial tires, spa...Over 4 weeks ago on RVUSATools
-
8.5' x 24' 9990 GVWR 84" Interior Height 6" Steel Tube Frame * 16" On-Center Formed Channel Steel Crossmembers * 6" Steel Triple Tube A-Frame Tongue * 24" On-Center Steel Tube Wall Uprights (10k Models) * 24" On-Center Galvanized Steel Tube Roof B...Over 4 weeks ago on RVUSATools
-
83"x14', (2) 7000# EZ-Lube brake axles, 15,432# GVWR, 26" sides, galvanized ramps, square tubing frame & tongue, tarp, 4 d-rings, power up & down, 8 ton scissors hoist, 10 ga. floor, 12 ga. wall, new 235/80/R16 (10) ply radial tires, spare holder ...Over 4 weeks ago on RVUSATools
