-
* 6" Channel Frame * 2 - 7,000 Lb Dexter Spring Axles (2 Elec FSA Brakes) * ST235/80 R16 LRE 10 Ply. (BLACK WHEELS) * Coupler 2-5/16" Adjustable (4 HOLE) * Treated Wood Floor w/2' Dove Tail (Only On 12' & Up) * Diamond Plate Fenders (removable) * ...Over 4 weeks ago on RVUSATools
-
82"x20', (2) 5200# EZ-Lube brake axles, square tubing uprights, 3"x2" square tubing top rail, 5" channel iron tongue, 2 5/16 coupler, 7000# drop leg set back jack, treated deck, 50" HD ladder style spring assist equipment gate, diamond plate steel...Over 4 weeks ago on RVUSATools
-
82"x18', (2) 5200# EZ-Lube brake axles, square tubing uprights, 3"x2" square tubing top rail, 5" channel iron tongue, 2 5/16 coupler, 7000# drop leg set back jack, treated deck, 50" HD ladder style spring assist equipment gate, diamond plate steel...Over 4 weeks ago on RVUSATools
-
* Steel Channel Frame * 3" Steel Channel Crossmembers * 5" Steel Channel Tongue, Fully Wrapped * HD Bulkhead * A-Frame Posi-Lock Coupler & Dual Safety Chains * Sealed Wiring Harness & 7-Way Plug * 7K Set-Back Jack * Taper Cut Under Tail for Low Ap...Over 4 weeks ago on RVUSATools
-
6'x12', 18" v-nose, 6.5' interior height, 72" rear opening height, 3500# EZ-Lube axle, new 205/75/R15 radial tires, 2" coupler, Cobra lined tongue & bumper, Z-Tech undercoating, 3/4 Drymax floor, plywood walls, 4 d-rings, 12V LED dome light, .030 ...Over 4 weeks ago on RVUSATools
-
6'x12', screw less sides, ramp door W/ dual cable spring assist & flap, 6.5' interior height, 6' rear door opening, 3500# axle, new 205/75/R15 tires, 1 piece aluminum roof, square tubing roof bows, square tubing wall posts, 3/4 Drymax floor, 16" c...Over 4 weeks ago on RVUSATools
-
82"x20', (2) 3500# EZ-Lube brake axles, 50" square tubing forward folding spring assist gate, 2"x 1.5" square tubing uprights, 2"x2" square tube top rail, 4" channel iron tongue, HD diamond plate steel fenders, new radial tires, sealed wiring harn...Over 4 weeks ago on RVUSATools
-
Up for sale is a 1998 race ready honda 300ex. This has had all new parts except for basically the frame! It is very quick and no short cuts have been taken. Well taken care of. The new engine has maybe at most ten hours. Oil and filter changed eve...Over 4 weeks ago on ClazTools
-
HANDY MANS SPECIAL! EVERYTHING WORKS, ALL APPLIANCES WORK, A/C WORKS, SOFT SPOTS ON ROOF, SOFT SPOT ON FRONT WALL, TAKE AS IS3 days ago on RVT ClassifiedsTools
-
Made in the U.S.A., allows dirt to fall through, Independent grapple tines, 2"x10" cylinders, 9500# of grappling force, 1/2" steel, reinforced quick attach, fully protected hoses, covered cylinders, fully greasable hinge points, oversized greasabl...Over 4 weeks ago on RVUSATools
-
* 3" x 2" Aluminum Angle Extrusion Frame * 3" x 2" Aluminum Angle Extrusion Crossmembers (Single Axle) * 4" Aluminum Triple Tube Tongue (Single Axle) * 2" x 1-1/2" Aluminum Extrusion Tube Uprights * 2" x 2" Aluminum Tube Top Rail * 2" A-Frame Posi...Over 4 weeks ago on RVUSATools
-
* Steel Angle Frame & Crossmembers * 2" x 1-1/2" Steel Tube Uprights * 2" x 2" Steel Tube Top Rail * (2) 2" x 5' Side Ramp Conversions (3,075 lb. Load Rating) * 4" Steel Channel Tongue * 2k Rated Setback Jack w/ Foot * A-Frame Posi-Lock Coupler * ...Over 4 weeks ago on RVUSATools
-
6' digging depth, 12" bucket W / 3 replaceable teeth, (Pengo 2300 series), boom constructed from 1/4 thick reinforced steel plate, comes equipped with Parker brand hoses, fittings & couplers (job site ready), oversized greasable pins, treaded step...Over 4 weeks ago on RVUSATools
-
* 3" x 2" x 3/16" Steel Angle Frame (Single Axle) * 4" x 3" x 1/4" Steel Angle Frame (Tandem Axle) * 3" x 2" x 3/16" Steel Angle Crossmembers * 4" Steel Channel Tongue * 2" x 1-1/2" Steel Tube Uprights * 2" x 2" Steel Tube Top Rail * 2" A-Frame Po...Over 4 weeks ago on RVUSATools
-
Fully enclosed cylinder , for pulling small trees & saplings, 1/2" thick steel plate on gripping teeth, comes equipped with Parker brand hoses, fittings, & couplers (job ready), 10 3/4" opening, treaded step, 4 rows of teeth, oversized greaseable ...Over 4 weeks ago on RVUSATools
